Dynabrade 64003 Superfinisher Tool Post Grinder, 4 in Belt, 1/16 to 1-1/2 ipm Speed, 0.5 hp, 230 VAC, 73 dB Sound
Item #:
DYNAB 64003
Product Info
Dynabrade
Manufacturer Part #: 64003
Dynabrade Tool Post Grinder, Superfinisher, Bare Tool, 4 in Belt, 1/16 to 1-1/2 ipm, 0.5 hp, 230 VAC, 73 dB, 32 in L x 13 in W x 18 in H
- Consistently attain repeatable finishes with this versatile new machine
- The unit and the control box can be built for front or back of the lathe, with an optional 15 ft (4.5 m) pendant for remote mounting
- With abrasive feed speed adjustable from 1-1/2 in (38.1 mm) to 1/16 in (1.6 mm) per minute, even diamond abrasives can be fully utilized
- With changeable contact wheels with widths of 1 in (25.4 mm), 2 in (50.8 mm), 3 in (76.2 mm) or 4 in (101.6 mm) and several contact wheel durometers, this machine can cover a wide variety of applications
- 5 in Dia contact wheel allows for up to 2 in (50.8 mm) shoulder clearance for getting into tight corners
- Once the bracket is indicated off the work piece, mounting the Superfinisher puts you very close to final setup
- Machine mounts easily to lathe in less than 5 minutes, using a mounting bracket with a ground face
- No tools are needed to change abrasive rolls and this simple procedure can be done very quickly
- An hour meter allows operator to schedule maintenance
- The unit has a precision air regulator, giving the operator repeatable control over the contact wheel pressure against the work piece
- Mounts to standard machine shop lathes in 5 minutes
- Constantly advances new abrasive at a speed from 1/16 in to 1-1/2 in per minute
- Precision air pressure regulator ensures a uniform contact force between the workpiece and roller
- Abrasive speeds as low as 1/16 in means utilizing all the abrasive, extending the abrasive life and eliminating re-use of roll with possible variance in finish
- Compact design makes the unit easier to fit onto almost any size lathe and provides good visibility of workpiece
- Balanced oscillating head with adjustable 0-15 cycles/second for smooth operation
- Front-of-lathe or back-of-lathe mounting configuration for user preference or lathes without reverse rotation
Item Specifications
-
Bare Tool
-
4 in
-
32 in L x 13 in W x 18 in H
-
0.5 hp
-
73 dB
-
1/16 to 1-1/2 ipm
-
Superfinisher
-
230 VAC