Loctite PC 7226 Nordbak Wear Prevention Coating, 3 lb Container
Item #:
LOCT 209824
Product Info
Loctite
Manufacturer Part #: 209824
Loctite PC 7317 Nordbak Wear Prevention Coating is an epoxy resin system designed to protect against fine particle abrasion. Typical applications include providing a protective lining in pneumatic conveyors and repairing and providing abrasion resistance in elbows, slurry pumps, hoppers, cyclones and dust collectors. It is trowelable, non-sagging and requires no additional tooling.
- Recommended for rebuilding, repairing and protecting high wear areas under typical dry service temperatures
- Trowelable
- Filled with small ceramic beads and silicon carbide for maximum protection against fine particle abrasion
- 4:1 mix ratio by volume/by weight
- 30 min work life time
- 15000 psi compressive strength
- D 85 shore hardness
- > 199.4 deg F flash point of part A and 399.2 deg F flash point of part B
- 1.537 specific gravity od part B
- Part A: epoxy resin; part B: epoxy hardener
Item Specifications
-
Part A: Fibrous Aluminum Oxide, Epoxy Resin, Silicon Carbide, Silicon Dioxide, Magnesium Oxide, Treated Fumed Silica, Neopentyl Glycol Diglycidyl Ether, Titanium Dioxide, Substituted Silane/Part B: Fibrous Aluminum Oxide, Silicon Carbide, Diethylenetriamine, 4,4-Isopropylidenediphenol, Amine Adduct, Amine Reacted Fatty Acid, Calcium Carbonate, Silicon Dioxide, Manganese Dioxide, Triethylenetetramine, Silane Derivative, Aliphatic Amine
-
Dark Gray/Tan
-
3 lb
-
Kit
-
740 sq-cm
-
6 hr
-
Liquid/Paste
-
Epoxy Part A/Ammoniacal Part B
-
PC 7226
-
250 deg F
-
2-Part
-
<10 g/L