Loctite EA 3471 Fixmaster Steel Putty, 1 lb Tub
Item #:
LOCT 219292
Product Info
Loctite
Manufacturer Part #: 219292
If you need a repair putty with a truly metal-like finish, try Loctite EA 3471. This 2-part, non-sagging epoxy putty is easy to apply with no need for heating or welding, and can be machined, drilled, tapped or filed. It’s perfect for repairing non-structural defects in castings; making jigs and fixtures; sealing vessels, tanks and valves; resurfacing worn air seals, and filling cavitated areas. You can rely on an operating temperature range of -30°C to 105°C (-22°F to 221°F).
- Steel putty is a non-slumping, two-part, steel-filled putty
- Will not sag or shrink
- Rebuilds worn parts fast limits downtime
- High steel content cures to a metal-like finish
- Superior adhesion bonds well to all metal substrates
- D 85 shore hardness
- 35 to 40 gel time at 21 deg C
- Epoxy resin part A, epoxy hardener part B
Item Specifications
-
Bronze, Cast Iron, Concrete, Copper, Stainless Steel, Steel, Aluminum
-
30 min
-
Epoxy
-
Gray/White
-
Part A: Diiron Trioxide, Epoxy Resin, Calcium Carbonate, Neopentyl Glycol Diglycidyl Ether, Manganese
-
Part B:Amine Adduct, Aliphatic Amine Adduct, Triethylenetetramine, Substituted Piperazine, Silicon Dioxide, Aliphatic Amine, 4,4-Isopropylidenediphenol, Aluminum, Alkyl Phenol, Benzyl Alcohol, Benzyldimethylamine
-
1 lb
-
Tub
-
278 sq-cm at 6 mm THK/0.45 kg
-
6 hr
-
>93 deg C
-
Paste
-
2.5:1 By Volume/6.25:1 By Weight
-
Part A: Slight/Musty, Part B: Ammoniacal
-
EA 3471
-
1395 psi
-
Part A: 2.6/Part B: 1.5
-
-30 to 105 deg C
-
4900 psi
-
2-Part
-
<10 g/L