DeWALT 03797-PWR Spike Pin Anchor, 3/16 in Dia, 2-3/4 in OAL, Forming Head, Carbon Steel
Item #:
POWER 03797-PWR
Product Info
DeWALT
Manufacturer Part #: 03797-PWR
DeWALT, 03797-PWR, Pin Anchor, Series: Spike, 3/16 in Diameter, 2-3/4 in Overall Length, Forming Head, Carbon Steel, Zinc Plated, 3/16 in Drill, 1-1/4 in Minimum Embedment Depth, 13/32 in OD x 9/16 in H Head, 2310 lb Shear Strength, 1410 lb Tensile Strength
- Pre-expanded Anchor design allows for easy installation
- Forming Spike, which is removable, can be used for temporary installations
- Pipe and tie-wire Spike is a simple to install alternative to direct fastening
- Designed for suspended ceiling
- The published length is measured from below the head to the end of the Anchor
- Ultimate load capacity: 830 lb tensile strength when embedded in 2000 psi, 1200 lb tensile strength when embedded in 3000 psi, 1410 lb tensile strength when embedded in 4000 psi and 1410 lb tensile strength when embedded in 5000 psi compressive strength concrete
- AISI 108 carbon steel anchor body
Item Specifications
-
3/16 in
-
3/16 in
-
Zinc Plated
-
13/32 in OD x 9/16 in H
-
Forming
-
Carbon Steel
-
1-1/4 in
-
2-3/4 in
-
Spike
-
2310 lb
-
1410 lb