DeWALT Power-Stud+ Powers 7400SD1-PWR Expansion Wedge Anchor, 1/4 in Dia, 1-3/4 in OAL, 3/4 in L Thread, Carbon Steel, Zinc Plated
Item #:
POWER 7400SD1-PWR
Product Info
DeWALT
Manufacturer Part #: 7400SD1-PWR
DeWALT Power-Stud+ Powers Wedge Anchor, Expansion, Series: SD1, 1/4 in Diameter, 1-3/4 in Overall Length, 3/4 in Thread Length, Carbon Steel, Zinc Plated, 1-1/8 in Minimum Embedment Depth, 1/4-20 Thread, Threaded Stud Head, UNC Thread, 3/8 in Maximum Work Thickness, 1255 lb Shear Strength, 1600 lb Tensile Strength
- Consistent performance in high and low strength concrete
- Anchor can be installed through standard fixture holes
- Anchor design allows for follow-up expansion after setting under tensile loading
- Nominal drill bit diameter same as Anchor diameter
- Length ID code and identifying marking stamped on head of each Anchor
- Ultimate load capacity: 1320 lb tensile strength when embedded in 2500 psi, 1435 lb tensile strength when embedded in 3000 psi and 1660 lb tensile strength when embedded in 4000 psi compressive strength concrete
- Ultimate load capacity: 1160 lb shear strength when embedded in 2500 psi, 1255 lb shear strength when embedded in 3000 psi and 1255 lb shear strength when embedded in 4000 psi compressive strength concrete
- Ultimate load capacity – 1320 lb tensile strength when embedded in 2500 psi, 1435 lb tensile strength when embedded in 3000 psi, 1660 lb tensile strength when embedded in 4000 psi normal-weight concrete
- Ultimate load capacity – 1160 lb shear strength when embedded in 2500 psi, 1255 lb shear strength when embedded in 3000 psi/4000 psi normal-weight concrete
- Allowable load capacity – 330 lb tensile strength when embedded in 2500 psi, 360 lb tensile strength when embedded in 3000 psi, 415 lb tensile strength when embedded in 4000 psi normal-weight concrete
- Allowable load capacity – 290 lb shear strength when embedded in 2500 psi, 315 lb shear strength when embedded in 3000 psi/4000 psi normal-weight concrete
Item Specifications
-
1/4 in
-
Zinc Plated
-
Threaded Stud
-
Carbon Steel
-
3/8 in
-
1-1/8 in
-
1-3/4 in
-
SD1
-
1255 lb
-
1600 lb
-
3/4 in
-
1/4-20
-
UNC
-
Expansion