DeWALT 7416SD1 SD1 Expansion Wedge Anchor, 3/8 in Dia, 5 in OAL, 3-5/8 in L Thread, Carbon Steel, Zinc Plated
Item #:
POWER 7416SD1-PWR
Product Info
DeWALT
Manufacturer Part #: 7416SD1-PWR
DeWALT, 7416SD1, Wedge Anchor, Expansion, Series: SD1, 3/8 in Diameter, 5 in Overall Length, 3-5/8 in Thread Length, Carbon Steel, Zinc Plated, 1-5/8 in Minimum Embedment Depth, 3/8 in Drill, 3/8-16 Thread, Hex Head, UNC Thread, 3 in Maximum Work Thickness, 2540 lb Shear Strength, 2685 lb Tensile Strength
- Consistent performance in high and low strength concrete
- Length ID code and identifying marking stamped on head of each Anchor
- Ultimate load capacity: 2240 lb tensile strength when embedded in 2500 psi, 2685 lb tensile strength when embedded in 3000 psi and 3100 lb tensile strength when embedded in 4000 psi compressive strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
Item Specifications
-
3/8 in
-
3/8 in
-
Zinc Plated
-
Hex
-
Carbon Steel
-
3 in
-
1-5/8 in
-
5 in
-
SD1
-
2540 lb
-
2685 lb
-
3-5/8 in
-
3/8-16
-
UNC
-
Expansion