DeWALT 7426SD1 SD1 Expansion Wedge Anchor, 1/2 in Dia, 7 in OAL, 5-1/4 in L Thread, Carbon Steel, Zinc Plated
Item #:
POWER 7426SD1-PWR
Product Info
DeWALT
Manufacturer Part #: 7426SD1-PWR
DeWALT, 7426SD1, Wedge Anchor, Expansion, Series: SD1, 1/2 in Diameter, 7 in Overall Length, 5-1/4 in Thread Length, Carbon Steel, Zinc Plated, 2-1/4 in Minimum Embedment Depth, 1/2 in Drill, 1/2-13 Thread, Hex Head, UNC Thread, 4-1/4 in Maximum Work Thickness, 4195 lb Shear Strength, 4155 lb Tensile Strength
- Consistent performance in high and low strength concrete
- Length ID code and identifying marking stamped on head of each Anchor
- Ultimate load capacity: 3800 lb tensile strength when embedded in 2500 psi, 4155 lb tensile strength when embedded in 3000 psi and 4800 lb tensile strength when embedded in 4000 psi compressive strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
Item Specifications
-
1/2 in
-
1/2 in
-
Zinc Plated
-
Hex
-
Carbon Steel
-
4-1/4 in
-
2-1/4 in
-
7 in
-
SD1
-
4195 lb
-
4155 lb
-
5-1/4 in
-
1/2-13
-
UNC
-
Expansion