DeWALT Power-Stud+ Powers 7446SD1-PWR Expansion Wedge Anchor, 3/4 in Dia, 7 in OAL, 4-1/2 in L Thread, Carbon Steel, Zinc Plated
Item #:
POWER 7446SD1-PWR
Product Info
DeWALT
Manufacturer Part #: 7446SD1-PWR
DeWALT Power-Stud+ Powers Wedge Anchor, Expansion, Series: SD1, 3/4 in Diameter, 7 in Overall Length, 4-1/2 in Thread Length, Carbon Steel, Zinc Plated, 3-3/8 in Minimum Embedment Depth, 3/4-10 Thread, Threaded Stud Head, UNC Thread, 2-7/8 in Maximum Work Thickness, 12580 lb Shear Strength, 9075 lb Tensile Strength
- Consistent performance in high and low strength concrete
- Anchor can be installed through standard fixture holes
- Anchor design allows for follow-up expansion after setting under tensile loading
- Nominal drill bit diameter same as Anchor diameter
- Length ID code and identifying marking stamped on head of each Anchor
- Ultimate load capacity: 7180 lb tensile strength when embedded in 2500 psi, 7860 lb tensile strength when embedded in 3000 psi and 9075 lb tensile strength when embedded in 4000 psi compressive strength concrete
- Allowable load capacity – 2870 lb shear strength when embedded in 2500 psi, 3145 lb shear strength when embedded in 3000 psi/4000 psi normal-weight concrete
- Ultimate load capacity – 8850 lb shear strength when embedded in 1500 psi, 9375 lb shear strength when embedded in 2000 psi at 12 in minimum edge/end distance and 10200 lb shear strength when embedded in 1500 psi, 10800 lb shear strength when embedded in 2000 psi at 20 in minimum edge/end distance grout-filled concrete masonry wall faces
Item Specifications
-
3/4 in
-
3/4 in
-
Zinc Plated
-
Threaded Stud
-
Carbon Steel
-
2-7/8 in
-
3-3/8 in
-
7 in
-
SD1
-
12580 lb
-
9075 lb
-
4-1/2 in
-
3/4-10
-
UNC
-
Expansion