Simpson Strong-Tie Strong-Rod AT-XP10 AT-XP High Strength Acrylic Adhesive, 9.4 oz Coaxial Cartridge, Liquid/Paste Form, Teal/Tan/White, 1.58
Item #:
SIMPS AT-XP10
Product Info
Simpson Strong-Tie
Manufacturer Part #: AT-XP10
Simpson Strong-Tie Strong-Rod Acrylic Adhesive, High Strength, Series: AT-XP, Coaxial Cartridge Container, 9.4 oz Container, Acrylic Glass Base, Composition: (Resin Teal Side)-Portland Cement, Calcined Clay, Ethoxylated Bisphenol-A Dimethacrylate, Propylidynetimethyl Trimethyl Trimethacrylate, Crystalline Silica, Quartz, Tetrahydrofurfuryl Methacrylate, (Initiator White or Tan Side)-Dibenzoyl Peroxide, White Mineral Oil, Titanium Dioxide, Kaolin, Silicon Dioxide, Liquid/Paste Form, 24 hr Curing, Teal/Tan/White, 1.58 Specific Gravity, >200/159 deg F Flash Point, 0.4173611111 Mixing Ratio, 30 g/L VOC, Applicable Materials: Grouted Concrete Block, Cracked Concrete, Dry/Water Saturated Concrete and Masonry
- Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to reduced and elevated temperatures and long-term sustained loads
- Code listed under the IBC/IRC for cracked and uncracked concrete per IAPMO UES ER-263 and City of L.A. RR25960
- Code listed under the IBC/IRC for masonry per IAPMO UES ER-281 and City of L.A. RR25966
- 10:1 two-component high strength, acrylic-based anchoring adhesive
- Easy hole cleaning procedure no power-brushing required
- For best results store between 14 to 80 deg F
- Cures in substrate temperatures as low as 14 deg F in 24 hrs or less
- Threaded rod anchoring and rebar doweling into concrete and masonry
- Suitable for horizontal, vertical and overhead applications
- Surfaces to receive adhesive must be clean
- Base material temperature must be 14 deg F or above at the time of installation
- For best results, material should be 14 to 80 deg F at time of application
- To warm cold material, store cartridges in a warm, uniformly heated area or storage container
- Do not immerse cartridges in water to facilitate warming
- Mixed material in nozzle can harden in 3 to 4 min at temperatures of 70 deg F and above
- Use only Simpson Strong-Tie mixing nozzles in accordance with Simpson Strong-Tie instructions
- Modification or improper use of mixing nozzle may impair AT-XP adhesive performance
- 12 months shelf life from date of manufacture in unopened container
- Compatible with CDT10S dispensing tool/AMN19Q mixing nozzle
Item Specifications
-
Grouted Concrete Block, Cracked Concrete, Dry/Water Saturated Concrete and Masonry
-
Acrylic Glass
-
Teal/Tan/White
-
(Resin Teal Side)-Portland Cement, Calcined Clay, Ethoxylated Bisphenol-A Dimethacrylate, Propylidynetimethyl Trimethyl Trimethacrylate, Crystalline Silica, Quartz, Tetrahydrofurfuryl Methacrylate, (Initiator White or Tan Side)-Dibenzoyl Peroxide, White Mineral Oil, Titanium Dioxide, Kaolin, Silicon Dioxide
-
9.4 oz
-
Coaxial Cartridge
-
24 hr
-
>200/159 deg F
-
Liquid/Paste
-
0.4173611111
-
AT-XP
-
1.58
-
High Strength
-
30 g/L