Simpson Strong-Tie DIAB25 Threaded Drop-In Anchor, 1/4 in, 3/8 in Drill, Carbon Steel, 1 in D Min Embedment
Item #:
SIMPS DIAB25
Product Info
Simpson Strong-Tie
Manufacturer Part #: DIAB25
Simpson Strong-Tie Drop-In Anchor, Threaded, 1/4 in Bolt/Rod, 1/4-20, Carbon Steel, 3/8 in Drill, 1 in Minimum Embedment Depth, 3/8 in Thread Length, 1 in Overall Length, 460 lb at 2500 psi/4000 psi for Concrete Shear Strength, 390 lb at 2500 psi, 490 lb at 4000 psi for Concrete Tensile, Zinc Plated
- New design offers easier installation than previous drop-in anchor design – sets with 40% fewer hammer hits
- Positive-set marking system indicates when anchor is properly set
- Lipped drop-in version available for flush installation
- Hand- and power setting tools available for fast, easy and economical installation
- Fixed depth stop bit helps you drill to the correct depth every time
- The allowable loads are based on a safety factor of 4
- The minimum concrete thickness is 1-1/2 times the embedment depth
Item Specifications
-
1/4 in
-
3/8 in
-
Zinc Plated
-
Carbon Steel
-
1 in
-
1 in
-
460 lb at 2500 psi/4000 psi for Concrete
-
390 lb at 2500 psi, 490 lb at 4000 psi for Concrete
-
3/8 in
-
1/4-20
-
Threaded