Simpson Strong-Tie DIAB37 Threaded Drop-In Anchor, 3/8 in, 1/2 in Drill, Carbon Steel, 1-9/16 in D Min Embedment
Item #:
SIMPS DIAB37
Product Info
Simpson Strong-Tie
Manufacturer Part #: DIAB37
Simpson Strong-Tie Drop-In Anchor, Threaded, 3/8 in Bolt/Rod, 3/8-16, Carbon Steel, 1/2 in Drill, 1-9/16 in Minimum Embedment Depth, 5/8 in Thread Length, 1-9/16 in Overall Length, 1195 lb at 2500 psi/4000 psi for Concrete Shear Strength, 740 lb at 2500 psi, 980 lb at 4000 psi for Concrete Tensile, Zinc Plated
- New design offers easier installation than previous drop-in anchor design – sets with 40% fewer hammer hits
- Positive-set marking system indicates when anchor is properly set
- Lipped drop-in version available for flush installation
- Hand- and power setting tools available for fast, easy and economical installation
- Fixed depth stop bit helps you drill to the correct depth every time
- The allowable loads are based on a safety factor of 4
- The minimum concrete thickness is 1-1/2 times the embedment depth
Item Specifications
-
3/8 in
-
1/2 in
-
Zinc Plated
-
Carbon Steel
-
1-9/16 in
-
1-9/16 in
-
1195 lb at 2500 psi/4000 psi for Concrete
-
740 lb at 2500 psi, 980 lb at 4000 psi for Concrete
-
5/8 in
-
3/8-16
-
Threaded