WIDIA 4002796 M1600 Series 16-Edged Standard Face Shell Mill, ANSI Code: M1600D050Z04S22ON06, 60.733 mm Dia Cutting, 22 mm Dia Shank, 40 mm OAL, Octagon Insert, 3.7 mm Max Depth of Cut, 47 deg Lead Angle
Item #:
WIDIA 4002796
Product Info
Widia
Manufacturer Part #: 4002796
WIDIA Face Shell Mill, 16-Edged Standard, Series: M1600 Series, 60.733 mm Diameter Cutting, 40 mm Overall Length, 3.7 mm Maximum Depth of Cut, Octagon Insert, 4 Inserts, 22 mm Shank Diameter, 47 deg Lead Angle, Right Hand Cutting Direction, 43 deg Cutting Angle, ANSI Code: M1600D050Z04S22ON06, ISO Code: M1600D050Z04S22ON06, 125.025 Insert Gage Screw, Steel, Yes Through Coolant
- Face mills for steel and cast iron with low cost per edge
- Precision ground insert
- Insert with positive rake geometry
- Smart insert design engineered to resist shock loads resulting in longer tool life
- 47 deg ANSI and 43 deg ISO lead angle
- For use on steel, stainless steel, cast iron, non-ferrous, high-temp alloys and hardened materials
- WK15CM is a wear-resistant grade with balanced toughness for general milling of cast irons
- Best results in dry machining, but can also be used wet
- WP35CM has a wide range of applications in general and rough milling of steels and cast iron
- Performs best in dry, but can also be used under wet conditions
- WU20PM is a universal grade for machining of steel, stainless steel and high temperature alloys
- Also suitable for machining of gray and nodular irons
- Resists breakage and offers improved wear resistance and increased strength
- Can be used for both dry and wet machining
Item Specifications
-
M1600D050Z04S22ON06
-
43 deg
-
60.733 mm
-
Right Hand
-
125.025
-
Octagon
-
M1600D050Z04S22ON06
-
47 deg
-
Steel
-
3.7 mm
-
4
-
40 mm
-
M1600 Series
-
22 mm
-
Yes
-
16-Edged Standard