WIDIA 6581490 M1200 MAX Screw Clamping Series 12-Edged Face Shell Mill, ANSI Code: M1200D080Z05S27HN11, 91.8 mm Dia Cutting, 27 mm Dia Shank, 50 mm OAL, Hexagon Insert, 7.5 mm Max Depth of Cut, 43 deg Lead Angle
Item #:
WIDIA 6581490
Product Info
Widia
Manufacturer Part #: 6581490
WIDIA Face Shell Mill, 12-Edged, Series: M1200 MAX Screw Clamping Series, 91.8 mm Diameter Cutting, 50 mm Overall Length, 7.5 mm Maximum Depth of Cut, Hexagon Insert, 5 Inserts, 27 mm Shank Diameter, 43 deg Lead Angle, Right Hand Cutting Direction, 56 deg Cutting Angle, ANSI Code: M1200D080Z05S27HN11, ISO Code: M1200D080Z05S27HN11, MS-2038 Insert Gage Screw, Steel, No Through Coolant
- Cutters with 56 deg lead angle with a 7 mm strong and thick insert
- PSTS insert with 12 cutting edges
- Insert with positive rake geometry
- 34 deg ANSI and 43 deg ISO lead angle
- For use on steel, stainless steel, cast iron, non-ferrous, high-temp alloys and hardened materials
- WK15CM is a wear-resistant grade with balanced toughness for general milling of cast irons
- Best results in dry machining, but can also be used wet
- WP35CM has a wide range of applications in general and rough milling of steels and cast iron
- Performs best in dry, but can also be used under wet conditions
- WU20PM is a universal grade for machining of steel, stainless steel and high temperature alloys
- Also suitable for machining of gray and nodular irons
- Resists breakage and offers improved wear resistance and increased strength
- Can be used for both dry and wet machining
Item Specifications
-
M1200D080Z05S27HN11
-
56 deg
-
91.8 mm
-
Right Hand
-
MS-2038
-
Hexagon
-
M1200D080Z05S27HN11
-
43 deg
-
Steel
-
7.5 mm
-
5
-
50 mm
-
M1200 MAX Screw Clamping Series
-
27 mm
-
No
-
12-Edged